Rimage PrismPlus! Betriebsanweisung PDF herunterladen (Seite 25)

22 110635_K

Rimage PrismPlus! User Guide

Clean the Print Head

Clean the print head at every ribbon change, or more often if streaks start to appear or the ribbon has torn.

There are two methods for cleaning the Prism print head—the Prism cleaning kit method, and the alternate method. The

alternate method can be used when a cleaning kit is not available. This section provides instructions for both methods.

 Note: If the Prism printer is connected to an autoloader or AutoPrinter, it may be easier to remove the printer from the

system before you begin the cleaning process.

• Power off the printer.

• Remove all cables and cords from the back of the printer. Refer to the Identify the Parts of the Prism Printer section

on page 11.

• Remove the printer from the system and place it on a at surface near a power outlet.

• Connect a separate power cord from the back of the printer to a power outlet.

Clean the Prism Print Head Using a Prism Cleaning Kit

If you have a Prism cleaning kit, use the following procedure to clean the print head.

# Required tools:

• Prism cleaning kit (PN 210555-001)

• A disc

• 99% Isopropyl alcohol

1. Prepare the Prism for cleaning.

a. Power off the Prism.

b. Remove the top cover.

c. Remove the ribbon. Refer to the Change the Print Ribbon section on page 24.

2. Begin cleaning mode.

a. While pressing and holding the operator button, press the power switch to power on the Prism.

b. When the Disc Not Present indicator light (the second light on the operator panel) ashes, release the operator

button. The printer tray opens.

c. The printer is in cleaning mode when the operator button and Disc Not Present indicator lights (the top two indicator

lights on the control panel) blink rapidly.

3. Prepare the cleaning pad.

 Note: The cleaning pad is included in the Prism cleaning kit.

a. Remove the adhesive backing from the

cleaning pad.

b. Attach the cleaning pad to the top of a disc.

Make sure that the edges of the pad are

aligned with the disc.

c. Place the cleaning pad with the attached

disc on the printer tray. Make sure the disc is

aligned with the retaining pins on the printer

tray.

d. Press the pad down and over the sensor on

the printer tray.

e. Place 5 drops of isopropyl alcohol on the

Pad Pressed Down Over

Sensor

Cleaning Pad with

Attached Disc

Printer Tray

English

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 173 174

Kommentare zu diesen Handbüchern

Keine Kommentare

Rimage PrismPlus! Betriebsanweisung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Rimage PrismPlus!