Rimage DLN5200 Bedienungsanleitung PDF herunterladen (Seite 10)

____________________________________________________________________________________________

Advancing the Art of Digital Delivery

www.rimage.com

Intended for Channel Partner Use Only - Not for external distribution. Version 1.1

Output Trays

The Rimage DLN5200/DL5200 is configured with five Output Trays and an Output Bin.

When a disc is recorded and printed, the Lift Arm moves the disc to the Output Bin or one

of the Output Trays. The disc slides down and out to the end of the tray. There is a sensor

located on each Output Tray detecting if a disc is in the Output Tray. The trays are

numbered 1 through 5, with #1 located at the top. To change the output configuration, use

the Rimage System Manager software.

1 – Output Trays

Output Bin

The Output Bin receives finished and/or failed discs. The Output Bin holds up to 75 discs.

To remove discs from the Output Bin, hold the Output Bin with one hand while moving the

Bin Latch up and then lower the bin down. This provides easy access to the Output Bin to

remove completed discs. The completed discs should be removed from the Output Bin

every time the supply bin is filled so it never becomes full.

1 – Bin Latch

2 – Output Bin

Product Views: Disc Output

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Rimage DLN5200 Bedienungsanleitung Seite 10